To Next Page

To Previous Page

Applications

5. Touch to start recording.

The video time remaining appears in the top left of the screen.

6. Touch to the end recording.

The video momentarily displays as a thumbnail in the lower left corner.

Photo Settings

In Photo mode, photo settings appear on screen. Touch to display the photo settings options.

Front Camera

• Selfie Flash - Turns screen white to help produce a little extra light in dimmer settings. Options: Off

(default), or On.

• Picture size - Set the size (in pixels) of the photo to: 1.3M pixels (default), HD720, 1M pixels, WVGA,

VGA, or QVGA.

• Picture quality - Set picture quality setting to: Low, Standard (default) or High.

• Countdown timer - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.

• Storage – Set location to store the photo to: Phone.

• Face Detection - Select to turn face detection Off (default) or On.

• ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100, ISO200,

ISO400, ISO800 or ISO1600.

• Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0 (default), -1 or -2.

• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most

natural-looking colors:

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.

• ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled)

• Selfie Mirror - Options: Disable (default), or Enable.

• Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not constant.

These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The

camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.

Zebra PS20 Series User Manual

Questions and Answers: