Specifications
253
PS20 Interface Connector Pin-Outs
Figure 168 Power Connector Pin-Outs
Cable Specifications
Power Supply Cable, Y-type
The 16 AWG wire should have the following specifications: UL1007, 300 Volt, PVC, -40° C to 80° C operating
temperature.
Table 26 Power Connector Pin-Outs
PIN Signal Name Function
1 +5V Input power
2 TX Transmit Output to Cradle
3 RX Receive Input from Cradle
4 GND Ground
Table 27 Wire Run List & Specifications
Wire Color AWG
Connector 1
Molex 39-01-2060
housing; 4x,
39-00-0211
contacts
Connector 2
Molex 39-01-2025
housing; 2x,
39-00-0211
contacts
Connector 3
Molex 39-01-2025
housing; 2x,
39-00-0211
contacts
Function
Red 16 1 1 (+) term
Black 16 6 2 (-) term
Red 16 2 1 (+) term
Black 16 5 2 (-) term
To Next Page
Loading...
Need help?
General
