ABB ACS180 User Manual

248 Parameters
l/s Liters per second. 79
l/min Liters per minute. 37
l/h Liters per hour. 38
m
3
/s Cubic meter per second. 88
m
3
/min Cubic meter per minute. 40
km
3
/h Cubic kilometers per hour. 131
gal/s Gallons per second. 47
ft
3
/s Cubic feet per second. 50
ft
3
/min Cubic feet per minute. 51
ft
3
/h Cubic feet per hour. 52
ppm Parts per million. 34
inHg Inch of mercury. 29
kCFM Thousands of cubic feet per hour. 126
inWC Inch water column. 65
gpm Gallons per minute. 80
gal/min Gallons per minute. 48
in wg Inch of water. 59
MPa Megapascal. 94
ftWC Foot water column. 125
40.80 Set 1 PID output min
source
Selects the source for set 1 PID output minimum. Set1 output
min
None None. 0
Set1 output min 40.36 Set 1 output min.1
Other Source selection (see Terms and abbreviations on page
102).
-
40.81 Set 1 PID output max
source
Selects the source for set 1 PID output maximum. Set1 output
max
None None. 0
Set1 output max 40.37 Set 1 output max 1
Other Source selection (see Terms and abbreviations on page
102).
-
40.89 Set 1 setpoint
multiplier
Defines the multiplier with which the result of the function
specified by parameter 40.18 Set 1 setpoint function is
multiplied.
1.00
-200000.00…
200000.00
Multiplier. 1 = 1
40.90 Set 1 feedback
multiplier
Defines the multiplier with which the result of the function
specified by parameter 40.10 Set 1 feedback function is
multiplied.
1.00
-200000.00…
200000.00
Multiplier. 1 = 1
No. Name/Value Description Default
FbEq 16
ACS180 FW.book Page 248 Tuesday, March 9, 2021 2:25 PM

ABB ACS180 Specifications

General

Product Type	DC Drive
Number of Phases	1 or 3
IP Rating	IP20
Communication Interfaces	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Storage Temperature	-40 to +70 °C
Relative Humidity	5 to 95 % non-condensing
Altitude	Up to 1000 m