Parameters 281
Supervision 1 Bit 0 of 32.01 Supervision status.24
Supervision 2 Bit 1 of 32.01 Supervision status.25
Supervision 3 Bit 2 of 32.01 Supervision status.26
Supervision 4 Bit 3 of 32.01 Supervision status 27
Supervision 5 Bit 4 of 32.01 Supervision status.28
Supervision 6 Bit 5 of 32.01 Supervision status.29
Other [bit] Source selection (see Terms and abbreviations). -
96.13 User set I/O mode in2 See parameter 96.12 User set I/O mode in1. Not selected
96.16 Unit selection Selects the unit of parameters indicating power,
temperature and torque.
0b0000
0b0000...0b1111 Unit selection word. 1 = 1
96.51 Clear fault and event
logger
Clears all events from the drive’s fault and event logs. Done
Done 0 = No action. 0
Reset 1 = Resets (clears) fault and event logger. 1
96.54 Checksum action Selects how the drive reacts
• when
96.55 Checksum control word, bit 8 = 1
(Approved checksum A): if the parameter checksum
96.68 Actual checksum A does not match 96.71
Approved checksum A, and/or
• when
96.55 Checksum control word, bit 9 = 1
(Approved checksum B): if the parameter checksum
96.69 Actual checksum B does not match 96.72
Approved checksum B.
No action
No action No action taken. (The checksum feature is not in use.) 0
Pure event The drive generates an event log entry (B686 Checksum
mismatch).
1
Warning The drive generates a warning (A686 Checksum
mismatch).
2
Warning and prevent
start
The drive generates a warning (A686 Checksum
mismatch).
Starting the drive is prevented.
3
Fault The drive trips on 6200 Checksum mismatch.4
No. Name/Value Description Default
FbEq 16
Bit Name Information
0 Power unit
(mechanical)
0 = kW
1 = hp
1 Reserved
2 Temperature
unit
0 = °C
1 = °F
3 Reserved
4 Torque unit 0 = Nm (N·m)
1 = lbft (lb·ft)
5…15 Reserved
ACS180 FW.book Page 281 Tuesday, March 9, 2021 2:25 PM
To Next Page
Loading...
Need help?
General
