Introduction to the manual
21
Introduction to the manual
What this chapter contains
This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.
Target audience
This manual is intended for panel builders and system integrators who
• plan the cabinet assembly of the drive module and install the module into a user-
defined cabinet
• plan the electrical installation of a drive cabinet
• make instructions for the end user of the drive conserning the mechanical
installation of the drive cabinet, power and control cabling and maintenance.
Read the manual before working on the drive. You are expected to know the
fundamentals of electricity, wiring, electrical components and electrical schematic
symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).
Contents of the manual
This manual contains the instructions and information for the basic drive module
configuration. The chapters of the manual are briefly described below.
Safety instructions give safety instructions for the installation, commissioning,
operation and maintenance of the drive module.
Introduction to the manual introduces the manual.
Operation principle and hardware description describes the drive module.
Planning the cabinet installation guides in planning drive cabinets and installing the
drive module into a user-defined cabinet. The chapter gives cabinet layout examples
and free space requirements around the module for cooling.
Mechanical installation describes how to install the basic drive module into a cabinet.
To Next Page
Loading...
Need help?
General
