ABB ACS850 Hardware Manual

Planning the cabinet installation
46
Planning the placement of the control panel
Note the following alternatives when planning the placement of the control panel:
• The control panel can be snapped on the control unit of the drive. See page 28.
• The control panel can be mounted onto the cabinet door using the control panel
mounting kit (+J410). For the installation instructions, refer to ACS-CP-U Control
Panel IP54 Mounting Platform Kit (+J410) Installation Guide (3AUA0000049072
[English]).
Planning the use of the cubicle heaters
Use a cubicle heater if there is a risk of condensation in the cabinet. Although the
primary function of the heater is to keep the air dry, it may also be required for
heating at low temperatures.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

ABB ACS850 Specifications

General

Safety	STO (Safe Torque Off)
Communication	CANopen
Enclosure	IP21
Output Voltage	Up to 1000 V DC
Protection Features	Overcurrent, Overvoltage, Undervoltage
Cooling Method	Air or liquid cooling
Input Voltage	380 to 690 V AC