3.4 Cleaning activities
3.4.1 Cleaning of control cabinet
Required equipment
NoteEquipment, etc.
ESD protectedVacuum cleaner
Internal cleaning
Clean the cabinet interior with an ESD protected vacuum cleaner, if necessary.
Do's and don'ts!
The section below specifies some special considerations when cleaning the
controller.
Always:
• use ESD Protection
• use cleaning equipment as specified above! Any other cleaning equipment
may shorten the life of paintwork, rust inhibitors, signs, or labels!
• check that all protective covers are fitted to the controller before cleaning!
Never:
• remove any covers or other protective devices when cleaning the outside of
the controller!
• use compressed air or spray with a high pressure cleaner!
114 Product manual - IRC5 Compact
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
3 Maintenance
3.4.1 Cleaning of control cabinet