ABB IRC5 Compact User Manual

4.8 Replacement of expansion board in the computer unit
Location
To connect a serial channel or a fieldbus adapter to the controller, the main
computer must be equipped with the expansion board DSQC1003.
The expansion board is located in the computer unit as shown below.
A
xx1300000860
Expansion board with serial channel and one slot for AnybusCC fieldbus adapter.A
Required equipment
NoteArt. no.Equipment
DSQC10033HAC046408-001Expansion Board
Removal
The following procedure describes how to remove the expansion board from the
computer unit.
Note/IllustrationAction
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section DANGER - Make sure that
the main power has been switched off! on
page 33.
1
Continues on next page
Product manual - IRC5 Compact 151
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
4 Repair
4.8 Replacement of expansion board in the computer unit

ABB IRC5 Compact Specifications

General

Brand	ABB
Model	IRC5 Compact
Category	Controller
Language	English