ABB | SACE Emax 2
8 | © 2014 ABB | 1SDH000999R0002 - L8569
Emax E1.2 circuit-breakers | 2 - Transport and checking on receipt
Identification of packaging
Examine the state of the packaging and check that:
• The data on the packaging plate match the data of the order.
• The box is intact and perfectly closed.
SACE EMAX E1.2 N 800
VERSION
FIXED
POL 3
TERMINALS
REAR HORIZONTAL TERMINALS
WITH ASSEMBLED ACCESSORIES
YO 48V AC-DC
CODE
A.B.
FB.NR.
80156446401183
8031004 035
Designed by ABB SACE Division
1SDA055987R1
1130055770 001100
BB45005188
1
2
4
5
3
6
Figure 3
Pos. Description
1 Short description of the circuit-breaker
2 Description of accessories
3 Commercial code
4 Confirmation number and location
5 Circuit-breaker serial number
6 Features of the circuit-breaker
Packaging checks
Examine the state of the material received and verify that:
• The circuit-breaker or the fixed part are consistent with the order.
• The circuit-breaker or the fixed part are completely intact.
IMPORTANT:
• check the material before any storage. For opening the packaging, follow the
procedures outlined in the section "Unpacking and handling - opening the packages"
on page 10
• in the case of inconsistencies report it within five days of receipt. See the paragraph
"Damage and Discrepancy Report" in this chapter.
Damage and Discrepancy
Report
If there is any damage to the packaging upon receipt and / or inconsistencies between order and product
identification label or product please contact ABB. Damage to the packaging must be reported no later than
seven days from receipt of the material.
NOTE: The notification must indicate the Packing List number.
To Next Page
Loading...
Need help?
General
