ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

ABB | SACE Emax 2
10 | © 2014 ABB | 1SDH000999R0002 - L8569
Emax E1.2 circuit-breakers | 3 - Unpacking and handling
3 - Unpacking and handling
Opening the packaging
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging
pouch.
The following is the procedure for opening the packaging:
1. Cut the tape that seals the box. See Figure 5 e Figure 6.
Figure 5
Figure 6
2. Open the upper part of the packing box and remove the upper containment protection. See Figure 7
e Figure 8.
Figure 7
Figure 8
Continued on the next page

ABB SACE Emax 2 Specifications

General

Type	Air circuit breaker
Rated Current	800 A to 6300 A
Breaking Capacity	Up to 150 kA at 415 V AC
Frequency	50/60 Hz
Number of Poles	3, 4
Installation	Fixed or withdrawable
Standards	IEC 60947-2
Trip Unit	Ekip Touch, Ekip Hi-Touch
Communication	Modbus, Profibus, Ethernet