Allen-Bradley PLC-5 User Manual

Publication 1785-UM012D-EN-P - July 2005
Cable Reference G-5
Programming Cable
Specifications
The specifications for each Allen-Bradley cable used for DH+
communications are shown on the following pages. Refer to the following
table for the exact location.
Cable - 1784-CAK
Connects 1785-KE to Workstation
T
For To Use this Cable See Page
Workstation 1785-KE 1784-CAK
25-5
Enhanced or Ethernet
PLC-5 controller
Workstation
(using a 1784-KT,
-KT2, -KL, or -KL/B)
1784-CP6
1784-CP with a
1784-CP7 adapter
1784-CP8 adapter
25-6
25-6
25-7
Workstation
(using a 1784-KTK1)
1784-CP5 with a
1785-CP7 adapter
25-6
Workstation
(using a 9-pin serial
cable)
1784-CP10
25-7
Workstation
(using a serial 25-pin
cable)
1784-CP11
25-8
Workstation
(using a 1784-PCMK)
1784-PCM5 with a
1784-CP7 adapter
25-8 and
25-6
1
2
7
3
13
4
5
6
8
11
1
4
6
2
5
3
7
8
14936
5
1
9
6
9
15
1
8
2.9 m
(9.50 ft.)
15-Pin
D-Shell
Connector
Pin Male
1785-KE
9-Pin D-Shell
Connector
Pin Female
D-Shell 15-Pin
(1785-KE)
D-Shell 9-Pin
Workstation
Workstation

Allen-Bradley PLC-5 Specifications

General

Brand	Allen-Bradley
Model	PLC-5
Category	Controller
Language	English