AMX NX-1200 User Manual

Terminal (Program Port/Telnet) Commands
121
NX-Series Controllers - WebConsole & Programming Guide
Accessing the Security Conf iguration Options
Security configuration options are only available to Program Port connections (see the Overview section on page 104).
1. In the Terminal session, type help security to view the available security commands. Here is a listing of the security help:
---- These commands apply to the Security Manager and Database ----
logout Logout and close secure session
set password complexity Sets the password complexity: low, medium, high.
set password min age [age] Sets the password min age.
set password max age [age] Sets the password max age.
set password history [count] Sets the number of historical passwords to compare against.
set lockout Set the password lockout settings
setup security Access the security setup menus
set security preset [level] Set the security preset
NOTE: The 'help security' and 'setup security' functions are only available via a direct Program Port connection. They are not
available to Telnet sessions.
NOTE: You can set the security preset levels to low, medium, or high.
2. Type setup security to access the Setup Security menu, shown below:
>setup security
---- These commands apply to the Security Manager and Database ----
1) Set system security options for NetLinx Master
2) Display system security options for NetLinx Master
3) Add user
4) Edit user
5) Delete user
6) Show the list of authorized users
7) Add Device
8) Edit device
9) Delete device
10) Show list of authorized devices
11) Add role
12) Edit role
13) Delete role
14) Show list of authorized roles
15) Set Inactivity Timeout (minutes)
16) Display Inactivity Timeout (minutes)
17) Enter LDAP security information
18) Test connection to the LDAP server
19) Test an LDAP user
20) Display LDAP security information
21) Show active sessions/logins
22) Backup Database
23) Restore Database from backup
24) Reset Database
25) Display Database
Or <ENTER> to return to previous menu
Security Setup ->
3. The Setup Security menu shows a list of choices and a prompt. To select one of the listed choices, simply enter the number of
the choice (1 - 25) at the prompt and press <Enter>.
Each option in the Setup Security menu displays a sub-menu specific to that option. The following subsections describe using each
of the Setup Security menu options.
NOTE: Changes made to the target Master from within the Terminal window are not reflected within the web browser, until the Master
is rebooted and the web browser connection is refreshed. Any changes made to the Master, from within the web browser are instantly
reflected within the Terminal session without the need to reboot.

AMX NX-1200 Specifications

General

Brand	AMX
Model	NX-1200
Category	Controller
Language	English