AMX NX-1200 User Manual

WebConsole - System Options
57
NX-Series Controllers - WebConsole & Programming Guide
WebConsole - System Options
System Overview
The System page is accessed by clicking System on the page’s main heading. This page allows you to view and configure various
aspects of the NetLinx System:
System Information - Options on this page allow you to view a detailed list of the properties of the Master. See the System
- Info section on page 57 for details.
Devices - Options in this tab allow you to view the details of additional attached devices (including module-supported third-
party devices). See the System - Devices section on page 58 for details.
The default view for the System option is Manage System / System Number (FIG. 48).
System - Info
The Info page (FIG. 48) enables you to view a detailed list of the properties of the Master. The properties include the Model ID and
serial number of the Master, network addresses, and firmware versions. This information is view-only. See the WebConsole -
Network Options section on page 36 for information on changing the network address of the Master.
FIG. 48
System - Info page

AMX NX-1200 Specifications

General

Brand	AMX
Model	NX-1200
Category	Controller
Language	English