AMX NX-1200 User Manual

WebConsole - Modules Options
59
NX-Series Controllers - WebConsole & Programming Guide
WebConsole - Modules Options
Modules Overview
The Modules page is accessed by clicking Modules on the page’s main heading. This page allows you to view and configure various
aspects of the NetLinx System:
Device Options - Options on this page display various details specific to additional (non-NetLinx) System Devices. See the
Modules - Device Options section on page 60 for details.
Bindings - Options on this page allow you to view the details of additional attached devices (including module-supported
third-party devices). See the Modules - Bindings section on page 61 for details.
User-Def ined Devices - Options on this page provide a listing with all of the dynamic devices that have been discovered in
the system, and allow you to add and delete User-Defined Devices. See the Modules - User-Defined Devices section on
page 64 for details.
Active Devices - Options on this page allow you to check devices for compatible Duet Modules. See the Modules - Active
Devices section on page 65.
The default view for the Modules option is Device Options (FIG. 50).
FIG. 50
Modules - Device Options page

AMX NX-1200 Specifications

General

Brand	AMX
Model	NX-1200
Category	Controller
Language	English