EasyManuals Logo
Home>Ansul>Fire Alarms>AUTOPULSE IQ-301

Ansul AUTOPULSE IQ-301 User Manual

Ansul AUTOPULSE IQ-301
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
System Overview General Description
14 IQ-301 PN 50036:F 10/29/2001
Section 1 System Overview
1.1 General Description
The AUTOPULSE IQ-301 is a compact, cost-effective, intelligent fire alarm control
panel with an extensive list of powerful features. The power supply and all electronics
are contained on a single circuit board, providing a complete fire control system for
most applications. Optional modules which plug into the main circuit board are
available for special functions.
1.2 Features
Figure 1 identifies major features of the control panel.
Single standard communication
(SLC) loop, meets NFPA Style 4, 6,
or 7 requirements
198 intelligent device capacity
Four Notification Appliance Circuits
standard
Optional RTM-8 eight-zone relay
module with transmitter
Optional 411, 411UD, 411UDACT,
or 911AC Digital Alarm
Communicator/Transmitter
Optional UDACT Universal Digital
Alarm Communicator/Transmitter
LCD-80 liquid crystal display,
mounts up to 6,000 feet (1,828.8 m)
from panel
ACS annunciators, including LDM
custom graphic annunciators
ACM-8R remote relay module,
increases point capacity
Printer interface
Real time clock, with European
format option
History file with 650 event capacity
Intelligent features
Sensitivity display in percent
Manual sensitivity adjustment
Day/Night automatic sensitivity
adjustment
Drift compensation (U.S. patent
pending)
Auto detector test (meets NFPA 72)
Maintenance Alert
Pre-Alarm (AWACS™ — 2 levels)
LED blink control
Releasing features
Four independent hazards
Cross zone (three methods)
Delay timer
Soak timer
Abort — four options
Manual release
Waterflow (non-silenceable)
selection per module point
Supervisory selection per point with
separate LED
Alarm Verification
•Walk Test
Positive alarm sequence (PAS)
pre-signal per NFPA 72
Silence Inhibit timer option
Auto silence timer option
March time/temporal code
Two-stage option for Canada
California code
Tornado warning code
Remote Ack/Silence/Reset/Drill via
Monitor Modules
Automatic time control functions,
with holiday exceptions
Autoprogram (learn mode) reduces
installation time
Password- and key-protected
nonvolatile memory.
Programmable from a PC with a
Windows®-based programming
utility
Rapid poll algorithm for manual
stations (U.S. patent pending)
Operates up to 1,000 feet (304.8 m)
with untwisted, unshielded wire
(U.S. Patent 5,210,523)
Operates sounder base on Action
Pre-Alarm level with general
evacuation on alarm level.
Burglar alarm point option.
Read status on program via modem
using dial-up phone lines.
Marine cabinet option (CAB-AM)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ansul AUTOPULSE IQ-301 and is the answer not in the manual?

Ansul AUTOPULSE IQ-301 Specifications

General IconGeneral
BrandAnsul
ModelAUTOPULSE IQ-301
CategoryFire Alarms
LanguageEnglish

Related product manuals