Ansul AUTOPULSE IQ-301 User Manual

Annunciators LCD-80 Display
140 IQ-301 PN 50036:F 10/29/2001
Appendix C Annunciators
C.1 LCD-80 Display
The LCD-80 alphanumeric display module is an AUTOPULSE IQ-301 ancillary device
that provides two modes of operation: Terminal Mode, where the LCD-80 acts as a
display repeater; and ACS Mode, where the LCD-80 acts as an alphanumeric
annunciator. To select the operation mode, use switch SW2 on the CPU (Figure 3 on
page 17). The LCD-80 features the following:
• 80-character LCD display that backlights under normal and alarm conditions
• Control switches for Acknowledge, Alarm Silence, and System Reset, all made
operational by an optional AKS-1 switch
• Time and date display field
• Annunciator backbox ABF-1 package with optional AKS-1 key switch and phone
jack options
• Remote operation (mounts up to 6,000 feet (1828.8 m) from the control panel)
• Local panel sounder with alarm/trouble resound
C.1.1 ACS Mode
ACS Mode, which requires programming the LCD-80, provides a remote or local
digital display and a printer interface for the control panel and provides the following
features:
C.1.2 Terminal Mode
Terminal Mode, which does not require any programming, offers the following
features: Device type identifiers from control panel; device and zone custom
alphanumeric labels from control panel, and time/date and device address from control
panel.
C.2 Terminal Mode (LCD-80) Annunciation Interface (TB5 on CPU)
In Terminal mode, the control panel annunciates all point information to remote
LCD-80 displays. Each LCD-80 mirrors the control panel LCD display and includes
Acknowledge, Silence, and Reset switches. An LCD-80 will display all 198 intelligent
points without being programmed. Switch SW2 on the CPU board must be set for
TERM and the control panel must be programmed for Terminal mode.
• General status banner
• 40 character custom label
• Step Display and Time/Date/Set
switches
• Custom “normal” message
• Alarm and trouble count
• First alarm/last alarm/alarm count
(European option)
• Field-programmable messages
(available in English and all foreign
language versions)
• Field programmable, nonvolatile
memory in two options (128 points,
40-character labels or 256 points,
20-character labels)
• Internal nonvolatile clock

Ansul AUTOPULSE IQ-301 Specifications

General

Brand	Ansul
Model	AUTOPULSE IQ-301
Category	Fire Alarms
Language	English