R5906113 /08 UDX24
Image 2-2: Opening box
2. Remove the small box on top of the projector. This box contains the accessories such as manuals, remote
control, etc.
Image 2-3: Remove accessory box, polymeric foam and projector
3. Remove the polymeric foam from the top of the projector.
4. Open the plastic bag and lift the projector out of its packaging
Save the original shipping cardboard box and packing material. They will be necessary if you ever
have to ship your projector. For maximum protection, repack your projector as it was originally
packed at the factory.
A plastic lens holder cover is placed into the lens opening of the projector. It's recommended to
reuse this cover each time you transport the projector. This to prevent intrusion of dust and foreign
particles.
The lens is delivered in a separate box.
2.3 UDX flight case
Introduction of the UDX flight case
The UDX flight case is designed to transport the UDX in a safe and secure manner, with or without being
mounted in its rigging frame. There's also sufficient space in the flight case to place the projector while
mounted in the UDX rigging frame. The four caster wheels, provided with breaks, and the eight handles make
Installation preparations
To Next Page
Loading...
Need help?
General
