BMW F 800 GS User Manual

Confirmation of maintenance work
BMW Service standard scope
The activities of the BMW Service standard scope are listed in the following. The actual scope of mainte-
nance work applicable for your vehicle may differ.
Performing the brief test using the BMW Motorrad diagnosis system
Checking coolant level
Checking/adjusting clutch play
Checking front brake pads and brake disks for wear
Checking rear brake pads and brake disk for wear
Checking front and rear brake fluid level
Visually inspect the brake lines, brake hoses and connections
Check the tension of the spokes and tighten as needed
Checking tire pressure and tread depth
Checking and lubricating the chain drive
Checking side stand for ease of movement
Checking the center stand for ease of movement
Checking steering-head bearing
Checking the lighting and signal system
Functional check for engine starting suppression
Final inspection and check for road safety
Set the service due date and remaining distance before next service
Checking charging state of battery
Confirm the BMW service in the vehicle literature
13
168
z Service

BMW F 800 GS Specifications

General

Displacement	798 cc
Bore x Stroke	82 mm x 75.6 mm
Power	85 hp (63 kW) at 7, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Upside-down telescopic fork, Ø 43 mm
ABS	Standard
Compression Ratio	12.0:1
Final Drive	Chain
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Torque	83 Nm (61 lb-ft) at 5, 750 rpm
Transmission	6-speed
Rear Suspension	Cast aluminum dual swing arm
Front Brake	Twin disc, 300 mm, 2-piston floating calipers
Rear Brake	Single disc, 265 mm, single-piston floating caliper
Fuel Capacity	16 liters
Seat Height	880 mm
Wet Weight	214 kg
Dry Weight	421 lbs (191 kg)
Frame	Tubular steel frame
Length	2, 320 mm
Width	945 mm
Height	1, 350 mm
Wheelbase	1, 578 mm