heating of the grips; the switch
should then be switched back to
the first level.
Approx. 50 % heater out-
put
100 % heating output
If no further changes are made
the selected heating level is
adopted as the setting.
To switch off the heated grip,
press button 1 repeatedly until
heated grip symbol 2 is not
shown anymore in the display.
Seat
Remove seat
Park motorcycle, ensuring that
support surface is firm and
level.
Turn seat lock 1 to left with
ignition key and hold while
pressing seat downward at
front to support movement.
Raise seat bench 2 at front and
release the ignition key.
Take off seat and place on
a clean surface with spacer
buffers facing downward.
Install seat
Insert seat in brackets 3.
Firmly press down on seat at
front.
The seat's detent mechanism
will be heard to engage.
Helmet holder
Locking helmet on
motorcycle
Remove seat ( 50).
4
50
z
Operation
To Next Page
Loading...
