EasyManuals Logo

BMW F 800 GS User Manual

BMW F 800 GS
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
Phase 2
Checking the diagnosable sys-
tem components while the mo-
torcycle is moving.
ASC indicator and warning
light flashes slowly.
ASC self-diagnosis
completed
The ASC indicator and warning
light goes out.
Check the display of all indica-
tor and warning lights.
ASC self-diagnosis rou-
tine not completed
ASC is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
If an ASC error is indicated fol-
lowing completion of the ASC
self-diagnosis routine:
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
Running in
Engine
In the period preceding the
initial inspection attempt to
change rpm and engine load as
frequently as possible, avoiding
extended periods at constant
rpm.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing highways if possible.
Observe the engine run-in
speeds.
Engine run-in speed
<5000 min
-1
Observe mileage, after which
the running-in check should be
performed.
Mileage until first
running-in check
311...746 miles
(500...1200 km)
Brake pads
New brake pads must be run in
before they achieve their opti-
mum friction force. This initial
reduction in braking efficiency
can be compensated for by ex-
erting greater pressure on the
brake levers.
7
76
z
Riding

Table of Contents

Other manuals for BMW F 800 GS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW F 800 GS and is the answer not in the manual?

BMW F 800 GS Specifications

General IconGeneral
Displacement798 cc
Bore x Stroke82 mm x 75.6 mm
Power85 hp (63 kW) at 7, 500 rpm
Fuel SystemElectronic fuel injection
Front SuspensionUpside-down telescopic fork, Ø 43 mm
ABSStandard
Compression Ratio12.0:1
Final DriveChain
Engine TypeLiquid-cooled, 4-stroke, parallel twin
Torque83 Nm (61 lb-ft) at 5, 750 rpm
Transmission6-speed
Rear SuspensionCast aluminum dual swing arm
Front BrakeTwin disc, 300 mm, 2-piston floating calipers
Rear BrakeSingle disc, 265 mm, single-piston floating caliper
Fuel Capacity16 liters
Seat Height880 mm
Wet Weight214 kg
Dry Weight421 lbs (191 kg)
FrameTubular steel frame
Length2, 320 mm
Width945 mm
Height1, 350 mm
Wheelbase1, 578 mm

Related product manuals