Name: Brother MFC-J6545DW
Brand: Brother
Rating: 5 (1 reviews)

To Next Page

To Previous Page

5-43

Confidential

1.3.25 Traveling Speed Check of Head/Carriage Unit (Maintenance mode 69)

< Function >

This procedure checks whether the traveling speed of the head/carriage unit is within

the specified range.

< Operating Procedure >

(1) Press the 6 and 9 keys in this order in the initial stage of the maintenance mode.

The machine shows "CR AGING" on the LCD and starts checking the traveling

speed of the head/carriage unit.

In each of travel speeds of 43.3, 26.7 and 21.7 inches/second (ips), the machine

checks whether the maximum and minimum traveling speeds of the head/carriage

unit are within the specified range.

- If the maximum and minimum speeds in all of the three traveling speeds are

within the specified range, the "430 270 210" appears on the LCD.

- If any one is out of the range, the machine shows some message, e.g., "430 270

21X" on the LCD. This sample message indicates that the speed variation is

within the allowable range when the head/carriage unit travels at 43.3 and 26.7

inches/second; however, it is out of the range at 21.7 inches/second.

(2) Press the X key to return the machine to the initial stage of the maintenance mode.

1.3.26 Customizing Destinations (Maintenance mode 74)

< Function >

This procedure customizes the machine according to settings of the language,

functions, and worker switches.

< Operating Procedure >

(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.

The "Select 74?" appears on the LCD.

(2) Press the Mono Start key to display the current settings on the LCD.

(3) Enter the desired customizing code.

(4) Press the Mono Start key to save the new setting and return the machine to the

initial stage of the maintenance mode.

If the destination is changed, the "PARAMETER INIT" appears on the LCD. Then,

if "PLS UPDATE PROG" and "Please DL ROM" is also displayed on the LCD, load

the latest firmware. (refer to Chapter 4, Section 1.3 "Install the firmware

(Maintenance mode 28).").

(5) Pressing the X key during the above procedure returns the machine to the initial

stage of the maintenance mode without saving the customizing code.

Note: If no keys are pressed for at least one minute with any display state, the machine

automatically returns to the initial stage of the maintenance mode.

Brother MFC-J6545DW Specifications

General

Type	all in one, fax
Color	white/gray, white
Touch Screen	yes
Display Size	3.7 inches
Tray Capacity	350
Output Tray Capacity	100
Automatic Document Feeder Capacity	50 sheets
Printing Method	color
Color Print Speed	20 pages per minute
Mono Print Speed	22 pages per minute
First Page Print Time	6 seconds
Print Resolution Mono	up to 4800 x 1200
Print Resolution Color	up to 4800 x 1200
Media Types	letter-size glossy inkjet paper; 4" x 6" glossy photo paper; letter-size multi-purpose paper
Two-Sided Printing	yes
Maximum Number of Pages Per Month	up to 30, 000
Reduction and Enlargement	yes
Photo Printing	yes
Scanner Type	flatbed
Scan Resolution	up to 2400 x 1200
Duplex Scan	no
Max Copies	999
Copier Resolution Mono	up to 4800 x 1200
Copier Resolution Color	up to 4800 x 1200
Fax Function	yes
Cartridges	lc3037bk, lc3037c, lc3037m, lc3037y, lc3039bk, lc3039c, lc3039m, lc3039y
Number Of Cartridges	4
Number of Ink Tanks	0
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	apple airprint, brother iprint&scan, ethernet, google cloud print, mopria print service, usb 2.0, wi-fi, wi-fi direct
Mobile Devices Connection	yes