Brother PR-650 - Resume Embroidering After Turning Off the Machine

OTHER BASIC PROCEDURES
—
——————————————————————————————————————————————————————————————
——
108
Embroidering From the Beginning or Middle of the
Pattern
If you wish to restart embroidering from the beginning, for example, if trial embroidery was sewn and an
incorrect thread tension was used or if the wrong thread color was used, restart the embroidering using the
forward/backward stitch key. In addition, you can go forward or back through the stitching by thread color
or by stitch to start stitching at any position of the pattern.
Note
● Be careful when going back or forward
through the stitching since the embroidery
frame moves at the same time.
1
Press the start/stop button to stop the
machine.
• If necessary, change the fabric framed in
the embroidery frame or trim and remove
the sewn stitches.
2
Touch .
X The stitch navigating screen appears.
■ To start sewing from the beginning
3
Touch .
1 Touch this key to return to the beginning of the
first color.
X The embroidery frame moves to the
starting position.
1