DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
Carries the authentication
information needed by the
home agent to authenticate
a mobile node during
registration. The
information is in the same
syntax as the ip mobile
configuration command.
Basically it contains the
rest of the configuration
command that follows that
string, verbatim. It
provides the Security
Parameter Index (SPI),
key, authentication
algorithm, authentication
mode, and replay
protection timestamp
range.
spi1926
Related Topics
Configuring the Switch to Use Vendor-Specific RADIUS Attributes, on page 95
Vendor-Proprietary RADIUS Server Communication
Although an IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary
information between the switch and the RADIUS server, some vendors have extended the RADIUS attribute
set in a unique way. Cisco IOS software supports a subset of vendor-proprietary RADIUS attributes.
As mentioned earlier, to configure RADIUS (whether vendor-proprietary or IETF draft-compliant), you must
specify the host running the RADIUS server daemon and the secret text string it shares with the switch. You
specify the RADIUS host and secret text string by using the radius server global configuration commands.
Related Topics
Configuring the Switch for Vendor-Proprietary RADIUS Server Communication, on page 97
How to Configure RADIUS
Identifying the RADIUS Server Host
To apply these settings globally to all RADIUS servers communicating with the Switch, use the three unique
global configuration commands: radius-server timeout, radius-server retransmit, and radius-server key.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 83
Configuring RADIUS
Vendor-Proprietary RADIUS Server Communication
To Next Page
Loading...
Need help?
General