Cisco Catalyst 250 Series User Manual

Monitoring Port Blocking
Table 38: Commands for Displaying Port Blocking Settings
PurposeCommand
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
show interfaces [interface-id] switchport
Where to Go Next
•
Additional References
Related Documents
Document TitleRelated Topic
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
TitleStandard/RFC
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 431
Configuring Port-Based Traffic Control
Monitoring Port Blocking

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English