Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
Enables the web-based authentication without SVI featurel2-webauth-enabled
Example:
Switch (config-params-parameter-map)#
l2-webauth-enabled
Step 4
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 5
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 7
Configuring Web-Based Authentication with VRF Aware
You configure the web-based authentication with VRF aware to redirect the HTML login page to the client.
These steps are optional.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
parameter-map type webauth global
4.
webauth-vrf-aware
5.
end
6.
show running-config
7.
copy running-config startup-config
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 385
Configuring Web-Based Authentication
Configuring Web-Based Authentication with VRF Aware

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English