Cisco Catalyst 250 Series User Manual

Related Topics
Privilege Levels, on page 22
Example: Setting the Privilege Level for a Command, on page 36
Changing the Default Privilege Level for Lines
Follow these steps to change the default privilege level for the specified line:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
line vty line
4.
privilege level level
5.
end
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Selects the virtual terminal line on which to restrict access.
line vty line
Example:
Switch(config)# line vty 10
Step 3
Changes the default privilege level for the line.
privilege level level
Step 4
Example:
Switch(config)# privilege level 15
For level, the range is from 0 to 15. Level 1 is for normal user
EXEC mode privileges. Level 15 is the level of access
permitted by the enable password.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 33
Controlling Switch Access with Passwords and Privilege Levels
Changing the Default Privilege Level for Lines

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English