Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 7
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 8
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 9
startup-config
Related Topics
RADIUS Login Authentication, on page 70
RADIUS Server Host, on page 69
Defining AAA Server Groups
You use the server group server configuration command to associate a particular server with a defined group
server. You can either identify the server by its IP address or identify multiple host instances or entries by
using the optional auth-port and acct-port keywords.
Follow these steps to define AAA server groups:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
radius server name
4.
address {ipv4 | ipv6} {ip-address | hostname} auth-port port-number acct-port port-number
5.
key string
6.
end
7.
show running-config
8.
copy running-config startup-config
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
88 OL-29048-01
Configuring RADIUS
Defining AAA Server Groups

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English