Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Step 8
Configuring Small-Frame Arrival Rate
Incoming VLAN-tagged packets smaller than 67 bytes are considered small frames. They are forwarded by
the switch, but they do not cause the switch storm-control counters to increment.
You globally enable the small-frame arrival feature on the switch and then configure the small-frame threshold
for packets on each interface. Packets smaller than the minimum size and arriving at a specified rate (the
threshold) are dropped since the port is error disabled.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
errdisable detect cause small-frame
4.
errdisable recovery interval interval
5.
errdisable recovery cause small-frame
6.
interface interface-id
7.
small-frame violation-rate pps
8.
end
9.
show interfaces interface-id
10.
show running-config
11.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch> enable
Step 1
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 395
Configuring Port-Based Traffic Control
Configuring Small-Frame Arrival Rate

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English