Cisco XR 12000 User Manual

Either a physical interface instance or a virtual interface instance as follows:
•
Physical interface instance. Naming notation is rack/slot/module/port and a
slash between values is required as part of the notation.
◦
rack: Chassis number of the rack.
◦
slot: Physical slot number of the modular services card or line card.
◦
module: Module number. A physical layer interface module (PLIM) is
always 0.
◦
port: Physical port number of the interface.
In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RP0 or
RP1) and the module is CPU0. Example: interface
MgmtEth0/RP1/CPU0/0.
Note
•
Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?)
online help function.
instance
(Optional) Collects only show command information.show-only
Specifies that the command output is displayed on the terminal.terminal
(Optional) Collects only trace information.trace-only
(Optional) Specifies a node.location
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
(Optional) Specifies all locations.all
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop for
page breaks).
Press the Ctrl+C keys to stop the command output.
page
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
342 OL-30353-01
Tech-Support Commands
show tech-support serial

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English