ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
104
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [DIRECT/MODBUS/ECU LINK]
Default value -
Step -
Comm object 24451 Related applications
Description
Communication protocol switches for the COM2 channel, if dual communication module is plugged in.
DIRECT LiteEdit communication protocol via direct cable.
MODBUS Modbus protocol. See detailed description in InteliDrive Communication Guide.
ECU link Protocol for communication with Cummins engines via Modbus.
Note: For details on communication speed and other technical parameters please see Technical data
on page 87.
For detail description see chapter Modbus protocol.
COM2 Mode
6 back to List of setpoints
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [-]
Default value -
Step -
Comm object 24436 Related applications
Description
In case that your modem needs additional initialization e.g. AT commands, it can be entered here. Otherwise
leave this setpoint blank.
ModemIniString
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English