Using Battery Packs 3-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 04/26/00 3:48 PM
Part Number: 170045-002 File name: Ch03
NOTE: The battery charge light is the right light on the front edge of
the computer. It turns on (solid) when a battery pack (in the
battery bay, DualBay, or MultiBay) is charging. It turns off when
fully charged. It blinks in a low-battery condition.
When the battery charge light turns off, the battery packs are fully
charged.
Inserting and Removing the
Primary Battery Pack
Removing the Primary Battery Pack
CAUTION: If the battery pack you are about to remove is the only
source of power to the computer, initiate Hibernation or connect the
computer to external power before removing the battery.
1. Pull forward on the primary battery release latch to release the
battery pack.
2. Remove the battery pack from the primary battery bay.
To Next Page
Loading...
Need help?
General