Working with Removable Drives and Device Bays 5-1
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: Compaq Customer Saved date: 04/26/00 4:26 PM
Pages: 10 Words: 1450 Template: c:\msoffice\templates\ref.dot
Part Number: 170045-002 File name: Ch05
chapter
5
WORKING WITH REMOVABLE
DRIVES AND DEVICE BAYS
Bay Configuration
The three computer bays support standard as well as optional
devices. Some devices can be hot plugged, while others must be
inserted after the computer has been turned off. The following
table is a list of devices supported in all bays, as well as the
computer power state required before inserting the device (see
Chapter 1 for bay locations):
Bay Configuration
Functional Bay Devices Supported Power State
MultiBay CD drive On
DVD drive On
LS-120 Drive Off
Second hard drive Off
Diskette Drive On
Third battery pack On
DualBay Diskette drive On
Second battery pack On
Battery bay Primary battery pack On
NOTE: If two 3.5-inch/8.89-cm diskette drives are inserted in the
MultiBay and the DualBay at the same time, only the DualBay
diskette drive will work.
To Next Page
Loading...
Need help?
General