Note
Slightly difference may be found in the interface due to different series.
Before web client operation, please check the following items:
Step 1 Network connection is right
Step 2 DVR and PC network setup is right. Please refer to Chapter 5.10.2 Network
(main menu->Setting->Network)
Step 3 Use order ping ***.***.***.***(* is DVR IP address) to check connection is OK or
not. Usually the return TTL value should be less than 255.
Note
Device default IP address is 192.168.1.108.
Current series product supports various browsers such as Safari, fire fox browser,
Google browser. Device supports multiple-channel monitor, PTZ control, DVR
parameter setup on the Apple PC.
5.2 Device Initialization
If it is your first time to use the device, please set a login password of admin (system
default user).
Note
For your device safety, please keep your login password of admin well after the
initialization steps, and change the password regularly.
Steps:
Step 1 Open the browser and then input the device IP address in the address column.
Step 2 Click Enter button.
Device displays device initialization interface. See Figure 5- 1.
To Next Page
Loading...
Need help?
General