Danfoss VLT AutomationDrive FC 302 Programming Guide

Parameter 12-66 Threshold
Table 649: Parameter 12-66 Threshold
12-66 Threshold
Default value: 15
Parameter type: Range, 0 - 2000000000
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
This parameter holds 6 threshold values. If 1 of these thresholds are exceeded, the POWERLINK interface exits operational mode.
The parameters are set to optimal settings and should not be changed. The actual value of the counters can be read out via parame-
ter 12-67 Threshold Counters.
Parameter 12-67 Threshold Counters
Table 650: Parameter 12-67 Threshold Counters
12-67 Threshold Counters
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
This parameter holds 6 counters. The counter reflects the actual value in the POWERLINK interface. Counters increase with a count
of 8 at detection of an error and decrease with a count of 1 when no errors are detected. The values are read-only.
Parameter 12-68 Cumulative Counters
Table 651: Parameter 12-68 Cumulative Counters
12-68 Cumulative Counters
Default value: 0
Parameter type: Range, 0 - 2147483647
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
Loss of SoC Cumulative. This parameter reflects the value in object 1C0Bh, sub-index 1.
Parameter 12-69 Ethernet POWERLINK Status
Table 652: Parameter 12-69 Ethernet POWERLINK Status
12-69 Ethernet POWERLINK Status
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
This parameter shows various status and error conditions for the Ethernet POWERLINK connection.
5.12.9 12-8* Other Ethernet Services
Parameter 12-80 FTP Server
Table 653: Parameter 12-80 FTP Server
12-80 FTP Server
Default value: [0] Disabled
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: True
Enables/disables the built-in FTP server.
Option
Name
Description
[0]*
Disabled
[1]
Enabled
AU275636650261en-000101 / 130R0334 | 367Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English