Danfoss VLT AutomationDrive FC 302 Programming Guide

Parameter 0-68 Safety Parameter Password
Table 41: Parameter 0-68 Safety Parameters Password
0-68 Safety Parameters Password
Default value: 300
Parameter type: Range, 0 - 9999
Setup: 1 setup
Conversion index: 0
Data type: Uint16
Change during operation: True
Enter the password for the safety parameters access. If parameter 0-69 Password Protection of Safety Parameters is set to [0] Disabled,
this parameter is ignored.
Parameter 0-69 Password Protection of Safety Parameters
Table 42: Parameter 0-69 Password Protection of Safety Parameters
0-69 Password Protection of Safety Parameters
Default value: [0] Disabled
Parameter type: Option
Setup: 1 setup
Conversion index: –
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Disabled
[1]
Enabled
5.1.8 0-7* Clock Settings
Parameter 0-70 Date and Time
Table 43: Parameter 0-70 Date and Time
0-70 Date and Time
Default value: Size related
Parameter type: Range, 0 - 0
Setup: All setups
Conversion index: 0
Data type: TimeOfDay
Change during operation: True
Sets the date and time of the internal clock. The format to be used is set in parameter 0-71 Date Format and parameter 0-72 Time
Format. When using the VLT® Real-time Clock MCB 117 option, the time is synchronized at 15:00 every day.
Parameter 0-71 Date Format
Table 44: Parameter 0-71 Date Format
0-71 Date Format
Default value: [1] DD-MM-YYYY
Parameter type: Option
Setup: 1 setup
Conversion index: –
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]
YYYY-MM-DD
[1]*
DD-MM-YY
[2]
MM/DD/YYYY
AU275636650261en-000101 / 130R0334 | 59Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English