Danfoss VLT AutomationDrive FC 302 Programming Guide

-
-
Parameter 42-85 Active Safe Func.
Table 1407: Parameter 42-85 Active Safe Func.
42-85 Active Safe Func.
Default value: [10] None
Parameter type: Option
Setup: All setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]
STO
[1]
SS1-a
[2]
SS1-b
[3]
SLS-a
[4]
SLS-b
[8]
SO Mon
[10]*
None
Parameter 42-86 Safe Option Info
Table 1408: Parameter 42-86 Safe Option Info
42-86 Safe Option Info
Default value: 0
Parameter type: Range, 0 - 25
Setup: All setups
Conversion index: 0
Data type: VisibleString
Change during operation: True
Shows information about the safety option. Can be used on the LCP.
Parameter 42-89 Customization File Version
Table 1409: Parameter 42-89 Customization File Version
42-89 Customization File Version
Default value: Size related
Parameter type: Range, 0.00 - 99.99
Setup: 1 setup
Conversion index: 0
Data type: Uint16
Change during operation: True
Stores the customization file version.
5.32 Parameter Group 43-** Unit Readouts
The parameters in this group provide readouts for monitoring the operation of drives in enclosure sizes D–F.
5.32.1 43-0* Component Status
N O T I C E
The following parameters are only available in FC 302:
Parameter 43-00 Component Temp.
Parameter 43-01 Auxiliary Temp.
AU275636650261en-000101 / 130R0334 | 677Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English