Danfoss VLT AutomationDrive FC 302 Programming Guide

Parameter 15-03 Power Up's
Table 764: Parameter 15-03 Power Up's
15-03 Power Up's
Default value: 0
Parameter type: Range, 0 - 2147483647
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
View the number of times the drive has been powered up.
Parameter 15-04 Over Temp's
Table 765: Parameter 15-04 Over Temp's
15-04 Over Temp's
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
View the number of drive temperature faults.
Parameter 15-05 Over Volt's
Table 766: Parameter 15-05 Over Volt's
15-05 Over Volt's
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
View the number of drive overvoltages.
Parameter 15-06 Reset kWh Counter
Table 767: Parameter 15-06 Reset kWh Counter
15-06 Reset kWh Counter
Default value: [0] Do not reset
Parameter type: Option
Setup: All setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Do not reset
No reset of the kWh counter is required.
[1]
Reset counter
Press [OK] to reset the kWh counter to 0 (see parameter 15-02 kWh Counter).
Parameter 15-07 Reset Running Hours Counter
Table 768: Parameter 15-07 Reset Running Hours Counter
15-07 Reset Running Hours Counter
Default value: [0] Do not reset
Parameter type: Option
Setup: All setups
Conversion index: -
Data type: Uint8
Change during operation: True
AU275636650261en-000101 / 130R0334478 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English