Dell EMC PowerEdge R7515 Service Manual

Figure 19. Removing the system cover
Next steps
1. Replace the system cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions on page 26.
2. Follow the procedure listed in the Before working inside your system on page 27.
3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the
system.
Steps
1. Align the tabs on the system cover with the guide slots on the chassis.
2. Close the system cover release latch.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, turn the lock clockwise to the lock position.
30
Installing and removing system components

Dell EMC PowerEdge R7515 Specifications

General

Brand	Dell
Model	EMC PowerEdge R7515
Category	Server
Language	English