Dell PowerConnect 8132 User Manual

262 Managing General System Settings
Managing the SDM Template
Beginning in Privileged EXEC mode, use the following commands to set the
SDM template preference and to view information about the available SDM
templates.
Configuring SNTP Authentication and an SNTP Server
Beginning in Privileged EXEC mode, use the following commands to require
the SNTP client to use authentication when communicating with the SNTP
server. The commands also show how to configure an SNTP server.
Requiring authentication is optional. However, if you configure
authentication on the switch SNTP client, the SNTP server must be
configured with the same authentication information to allow time
synchronization to take place between the two devices.
Command Purpose
configure Enter Global Configuration mode.
sdm prefer {dual-ipv4-
and-ipv6 default| ipv4-
routing {data-center |
default}}
Select the SDM template to apply to the switch after the
next boot.
CTRL + Z Exit to Privileged EXEC mode.
show sdm prefer
[ template ]
View information about the SDM template the switch is
currently using. Use the template variable to view the
parameters for the specified template.
Command Purpose
configure Enter Global Configuration mode.
sntp authentication-key
key_id md5 key_word
Define an authentication key for SNTP. The variables are:
• key_id — The encryption key ID, which is a number from
1–4294967295.
•
key_word —The authentication key, which is a string of
up to eight characters.

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English