Configuring iSCSI Optimization 409
iSCSI Optimization Configuration Examples
iSCSI optimization is enabled by default with the appropriate settings to
operate properly is almost all configurations. However, you find it necessary to
alter those settings, the following procedure illustrates the configuration steps
required.
Configuring iSCSI Optimization Between Servers and a Disk Array
Figure 17-6 illustrates a PowerConnect 8000-series or 8100-series switch
connecting two servers (iSCSI initiators) to a disk array (iSCSI targets).
An iSCSI application running on the switch has installed priority filters to
ensure that iSCSI traffic that is part of these two sessions receives priority
treatment when forwarded in hardware.
Figure 17-6. iSCSI Optimization
To Next Page
Loading...
Need help?
General