Dell PowerConnect 8132 User Manual

576 Configuring VLANs
Bind MAC to VLAN
Use the Bind MAC to VLAN page to map a MAC address to a VLAN. After
the source MAC address and the VLAN ID are specified, the MAC to VLAN
configurations are shared across all ports of the switch. The MAC to VLAN
table supports up to 128 entries.
To display the Bind MAC to VLAN page, click Switching
→ VLAN → Bind
MAC to VLAN in the navigation panel.
Figure 22-12. Bind MAC to VLAN
From the Bind MAC to VLAN page, click Show All to see the MAC
addresses that are mapped to VLANs. From this page, you can change the
settings for one or more entries or remove an entry.

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English