Dell PowerConnect 8132 User Manual

Configuring SNMP 291
Trap Flags
The Trap Flags page is used to specify which traps you want to enable or
disable. When the condition identified by an active trap is encountered by
the switch, a trap message is sent to any enabled SNMP Trap Receivers, and a
message is written to the trap log.
To access the Trap Flags page, click Statistics/RMON
→ Trap Manager →
Trap Flags in the navigation panel.
Figure 13-15. Trap Flags

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English