Dell PowerConnect 8132 User Manual

Managing Images and Files 317
Active Images
Use the Active Images page to set the firmware image to use when the switch
boots. If you change the boot image, it does not become the active image
until you reset the switch.
To display the Active Images page, click System
→ File Management →
Active Images in the navigation panel.
Figure 14-2. Active Images
NOTE: On the PC8000-series switches, the images are named image1 and
image2 . On the PC8100-series switches, the images are named active and
backup .

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English