Dell PowerConnect 8132 User Manual

908 Configuring IP Routing
Figure 33-10. Router Route Entry and Preference Configuration
3 Next to Route Type, use the drop-down box to add a Default, Static, or
Static Reject
route.
The fields to configure are different for each route type.
•
Default — Enter the default gateway address in the Next Hop IP
Address
field.
•
Static — Enter values for Network Address , Subnet Mask , Next Hop
IP Address
, and Preference .
•
Static Reject — Enter values for Network Address , Subnet Mask , and
Preference .
4 Click Apply .
The new route is added to the routing table.

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English