Table 46. System Setup Main Menu (continued)
Option Description
Device Settings Enables you to configure device settings for devices such as
storage controllers or network cards.
Service Tag Settings Enables you to configure the System Service Tag.
System BIOS
To view the System BIOS screen, power on the system, press F2, and click System Setup Main Menu > System BIOS.
Table 47. System BIOS details
Option Description
System Information Provides information about the system such as the system model name, BIOS
version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor Settings Specifies information and options related to the processor such as speed and
cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
NVMe Settings Specifies options to change the NVMe settings. If the system contains the
NVMe drives that you want to configure in a RAID array, you must set both
this field and the Embedded SATA field on the SATA Settings menu to
RAID mode. You might also need to change the Boot Mode setting to UEFI.
Otherwise, you should set this field to Non-RAID mode.
Boot Settings Specifies options to specify the Boot mode (BIOS or UEFI). Enables you to
modify UEFI and BIOS boot settings.
Network Settings Specifies options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
NOTE: Network Settings are not supported in BIOS boot mode.
Integrated Devices Specifies options to manage integrated device controllers and ports, specifies
related features, and options.
Serial Communication Specifies options to manage the serial ports, its related features, and options.
System Profile Settings Specifies options to change the processor power management settings, memory
frequency.
System Security Specifies options to configure the system security settings, such as system
password, setup password, Trusted Platform Module (TPM) security, and UEFI
secure boot. It also manages the power button on the system.
Redundant OS Control Sets the redundant OS information for redundant OS control.
Miscellaneous Settings Specifies options to change the system date and time.
System Information
To view the System Information screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > System Information.
Table 48. System Information details
Option Description
System Model Name Specifies the system model name.
54 Pre-operating system management applications
To Next Page
Loading...
Need help?
General
