out of the library. To replace a magazine, insert the back of the magazine into the
front of the library and gently push the magazine into the library. The magazine
will lock when inserted into the library.
Attention: After inserting the magazines into the library, you must wait for the
library to complete its inventory before proceeding with normal library operations.
If the magazines are not pulled out of the library within 15 seconds after they are
unlocked, the command will cancel and you will have to repeat the process to
unlock the magazines.
Control: Re-Inventory
Use this menu item to initiate a scan of the cartridges currently in the library.
Note: It may take up to five minutes to complete the library inventory.
Configure Menu
The Configure Menu is used during the initial setup of your library and when
changes need to be made to your library's configuration. This menu contains the
following items:
v Logical Libraries
v Library Settings
v Drive
v Network
v Set Access PIN
v Save/Restore
v Set Date and Time
Configure: Logical Libraries
Use this menu item to select the number of logical libraries. The Currently
Configured - x section shows the number of logical libraries currently configured.
Control
Re-Inventory
a77ug055
Figure 5-12. Control: Re-Inventory menu
5-18 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
To Next Page
Loading...
Need help?
General
