Table 8-2. Sub error codes (continued)
10 Error gripper init, get range failed
11 Error during slider home movement
12 Error during rotation to FAR position
13 Error sled init, move to sensor failed
14 Error during sled movement; check shipping lock
20 Error Inventory scan
21 Error during gripper close
22 Error slider home movement
23 Error during move gripper to scan pos
24 Error reading barcode label
25 Error during move sled to scan position
26 Error during move elevator to scan position
27 Error during sled preposition movement
28 Error Extra inventory scan
29 Error during closing gripper
2A Error slider preposition movement
2B Error during opening gripper
2C Error during sled movement up to sensor
2D Error slider preposition backwards movement
30 Error slot preposition
31 Error during sled movement in FLMoveRotation function
32 Command sending to robotic failed
33 Error during elevator movement in FLMoveRotation function
34 Error during rotation in FLMoveRotation function
35 Error during elevator movement in FLMoveSled function
36 Error during sled movement in FLMoveSled function
37 Error during sled positioning to sensor in FLMoveSled function
8-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
To Next Page
Loading...
Need help?
General
