Delta VFD-V Series User Manual

5
VFD-V Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-73
Meaning of the Error Codes:
Error Codes Explanations
1 Data Contents Error:
If the value of the data contents is great, it is then not
recognizable by the drive.
2 Parameter Address Error:
Parameter addresses not recognizable by the drive.
3 Password Locked: parameter change disabled
4 Parameter change disabled during operation
5 E
2
ROM Error when the parameter is written in
6 Data Length Error
7 The parameter is a fixed value, and thus, parameter
read is enabled and parameter change disabled
8 When LV, parameter read enabled and parameter
change disabled
9 Parameter Locked: parameter read disabled (Pr. 00-02)
10 Transmission Overtime
11 Frame Error: word frame error.
09-05 Keypad Transmission Fault Treatment
a
Factory setting 0
Settings 0 warn and keep operating
1 warn and RAMP to stop
2 warn and COAST to stop
 This parameter is utilized to determine the treatment of the drive if errors occurred during
the communication.

Delta VFD-V Series Specifications

General

Brand	Delta
Model	VFD-V Series
Category	Controller
Language	English