Delta VFD-V Series User Manual

VFD-V Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-54
Output Frequency
Time
ON
OFF
RUN/STOP
Startup Frequency
01-09

This parameter determines the frequency point of DC braking for both Pr. 07-02 and Pr.
07-03.

During deceleration, the drive will begin to output a DC current once the frequency reaches
the value set in this parameter.

Immediately following a RUN command, the drive will output a DC current until the output
frequency reaches the value set in this parameter.

The DC braking is commonly used to help decrease the deceleration time. For the best
stopping performance, it is recommended to use the Deceleration Time (Pr.01-13) to slow
the motor and then apply the DC brake at speeds below 25hz.
07-05 Increasing Rate of the DC Voltage
a
Factory setting 30
Settings 1~500

This parameter determines the rate of increase for the DC voltage output during the DC
injection braking function.
Output Frequency
Time
ON
OFF
RUN/STOP
Startup Frequency
01-09

Delta VFD-V Series Specifications

General

Brand	Delta
Model	VFD-V Series
Category	Controller
Language	English