Doosan GC25P-3 User Manual

- 121 -
Engine Flywheel Removal
IMPORTANT: Note the position and direction of the
engine flywheel before removal. The engine flywheel
must be reinstalled to the original position and
direction.
1. Remove the engine flywheel bolts.
2. Remove the engine flywheel.
Distributor Removal
1. Disconnect the secondary ignition wires (1) from the
spark plugs and the ignition coil.
2. Disconnect the primary ignition harness (4) from the
ignition coil. Do not remove the wires from the
distributor unless it is necessary.
3. Remove the distributor hold down bolt (6).
4. Remove the distributor (2) and gasket (3).
VE010-3L
VE009-3L
LP Engine G430(3.0L) Base Engine Service Procedure

Doosan GC25P-3 Specifications

General

Brand	Doosan
Model	GC25P-3
Category	Engine
Language	English